Does the external environment affect the quality of injection molded products?

Injection mold manufacturers rare ten people, hundreds and thousands of people. Some environments are very good, some are normal, and some are very bad. Does the external environment affect the product quality? The answer is definitely yes. Why does the external environment affect the quality of injection moulds? The following GonSon injection mold manufacturer's editor will give you a detailed explanation, the details are as follows.

Injection mold

1. We start from the mold room of the injection mold factory. If the molds and other equipment in the mold room are placed neatly, there is no oil on the floor and desktop, and everyone is working in an orderly manner.

2. The molds produced by the equipment from the viewpoint of the injection molding workshop, the injection molding machines are neatly placed, the exhaust equipment is complete, the workshop is well ventilated, there is no oil and another small amount of debris on the floor, the equipment is improved, and the personnel of the injection molding department operates safely according to the rules. Rules. The internal wiring of the machinery and equipment is neat and not exposed. 3.

3. the oil spraying and silk-screening part have good ventilation facilities. Personnel in this section have regular monthly medical checkups and strictly follow high-risk work operations. 4.

4. Chemical substances should be placed in designated localities and placed regularly. It is handled by a person in charge and combined by a person for local handling.

Although the above operations seem simple but not important, yet they are very important for the products produced by injection mold manufacturers. Injection molds have become a widely used material in various fields.

Next, we will explain the number of operating cycles or the number of parts that can be produced by the injection mold. It is necessary to process all the front and rear internal molds, inserts, rows, skewed tops, straight tops (push blocks), etc. on the bottom or side of the waist-shaped pit and engrave the material designation and hardness. Maintenance cost, cycle time, etc.

Product quality: product scale stability, compliance, product surface finish, product material utilization, etc. It is necessary to spray a white/ or colorless rust inhibitor on the internal molds before packing the molds. Injection molds are not only high quality and longer than other molds, they can not only save more customer cost but also bring accurate user experience, thus saving your trouble, job volume, and professional safety assurance.